hi!
tonight i endmy dro pcb.
i use your software on a bluepill.
it works great.
when i use it on my lathe i got a tolareance between 1/100 & 3/100.
but! when we are true... 3/100 is nothing!
befor i used the as5311 .. i run my dro with digital calipers and mechanical clocks.. and much more measuring with micrometers.
know i can calibrate my lathe and it works top!
example:
i put in 25mm steel rod.
i make a small cut.
i reset the dro.
i measure with micrometer.
i got 24.65mm
know i crank my topslide to - 12.325mm.
i reset the axis on the dro.
i go to 24.50mm andmake a cut.
i measure with micrometer.
i got 24.498 or 24.508 or 24.515.
thats enough.
thats not building space ships.
thats a tolerance better as any payable cnc lathe.
iuse a emco compact 8.
0.05mm gab and 1mm s/n pole magnetic stripes from siko
thanks dude!
my as5311 is covered with uv-nail coat.
in the back i use liquid engine gasket on Polyutheran base!
works best.
i do some small housing in brass and adjust it with spacers.
tomorrow more pictures!
thanks dude