Re-
Suite au 2 $$
Réponse:
$0=10 (step pulse, usec); $1=25 (step idle delay, msec); $2=0 (step port invert mask:00000000); $3=0 (dir port invert mask:00000000); $4=0 (step enable invert, bool); $5=0 (limit pins invert, bool); $6=0 (probe pin invert, bool); $10=3 (status report mask:00000011); $11=0.010 (junction deviation, mm); $12=0.002 (arc tolerance, mm); $13=0 (report inches, bool); $20=0 (soft limits, bool); $21=0 (hard limits, bool); $22=0 (homing cycle, bool); $23=0 (homing dir invert mask:00000000); $24=25.000 (homing feed, mm/min); $25=500.000 (homing seek, mm/min); $26=250 (homing debounce, msec); $27=1.000 (homing pull-off, mm); $100=250.000 (x, step/mm); $101=250.000 (y, step/mm); $102=250.000 (z, step/mm); $110=500.000 (x max rate, mm/min); $111=500.000 (y max rate, mm/min); $112=500.000 (z max rate, mm/min); $120=10.000 (x accel, mm/sec^2); $121=10.000 (y accel, mm/sec^2); $122=10.000 (z accel, mm/sec^2); $130=200.000 (x max travel, mm); $131=200.000 (y max travel, mm); $132=200.000 (z max travel, mm); ok
Tu veux un décodeur canal+
Merci @+