Rectifieuse C600 CNC Fagor 8055i - Programme PLC

  • Auteur de la discussion MOHAMED LAMINE ASSASLA
  • Date de début
M

MOHAMED LAMINE ASSASLA

Nouveau
Bonjour à tous, Je suis actuellement en train de travailler sur une rectifieuse CNC Fagor C600 et je suis à la recherche du programme PLC (automate programmable) associé. Malheureusement, le programme original est manquant, et je me demande si quelqu'un parmi vous aurait accès à ce programme ou pourrait m'aider à le retrouver. Toute aide, informations, ou conseils seraient grandement appréciés. Si vous avez des connaissances sur la programmation PLC pour la rectifieuse CNC Fagor C600 ou si vous savez où je pourrais obtenir ce programme, je vous serais reconnaissant de partager votre expertise. Merci d'avance pour votre aide ! Cordialement,
% ,MX--,
;********************PLC PROGRAM for GER CYLINDRIC GRINDING MACHINES***********
;File name : PLC-PRG.PIT
;Control type : FAGOR 8040
;Version PLC : V1.0
;Author : Josu Arriola
;Date : February-2006
 
Dernière édition par un modérateur:
M

mickbzh

Compagnon
Bonjour, pourquoi avez-vous besoin du PLC ?
Batteries HS ?
Normalement, vous avez une sauvegarde du PLC sur le disque dur de la CN.
 
M

MOHAMED LAMINE ASSASLA

Nouveau
Bonjour, et merci pour la réponse , la copie que j'ai trouvé sur le disque dur (plc_prg.pit) est incomplète , erreur durant la compilation (étiquette sans définir) L2 L15 et L65.
 
M

MOHAMED LAMINE ASSASLA

Nouveau
oui , bien sûr ,
% ,MX--,
;********************PLC PROGRAM for GER CYLINDRIC GRINDING MACHINES***********
;File name : PLC-PRG.PIT
;Control type : FAGOR 8040
;Version PLC : V1.0
;Author : Josu Arriola
;Date : February-2006
; PLC RESOURCES
;------------------------- PLC INPUTS ------16+32+8----------------------------
DEF I-EMERGEN I1;
DEF I-WHEEL-ON I2; CAMBIO I98;
DEF I-INTWHEEL-ON I3; CAMBIO I99;
DEF I-WHEEL-VAR-OK I4; CAMBIO I102;
DEF I-DRIVES-OK I5; CAMBIO I103;
DEF I-POSAX-FORW I6;
DEF I-POSAX-BACK I7;
DEF I-AISIAKIN-PRES-MIN I8; Aisiakin
DEF I-AISIAKIN-PRES-MAX I9; Aisiakin
DEF I-IWHEEL-VAR-OK I10; CAMBIO I104;
;Puertas normales
DEF I-PROT-LOCKED I11; Puertas normales CAMBIO I73
DEF I-PROT-COIL-ACT I12; Puertas normales CAMBIO I74
;Puertas automaticas
DEF I-PROT-CALLIBRATED I11; Puertas automaticas
DEF I-PROT-ERROR I12; Puertas automaticas
DEF I-PROT-POS-REACHED I13; Puertas automaticas
;
DEF I-SETA-RET I14;
DEF I-TERMICO-PRIO1 I15; CAMBIO I100
DEF I-TERMICO-PRIO2 I16;
DEF I-CHUCK-ON I65;
DEF I-DRESSER-BACK I66;
DEF I-DRESSER-FORW I67;
DEF I-LUB-LEVEL I68;
DEF I-LUB-PRES I69;
DEF I-REF-X I70;
DEF I-REF-Z I71;
DEF I-REF-A I72;
DEF I-REF-C I73; CAMBIOI10;
DEF I-POW-OK I74; CAMBIOI97;
DEF I-LIMITS I75;
DEF I-WHEEL-PROT I76;
DEF I-OPEN-CHUCK I77;
DEF I-CLOSE-CHUCK I78;
DEF I-SPINDLE-SLOW I79;
;
; Entradas Grupo hidrostatico
DEF I-HIDROS-ON I82;
DEF I-HIDROS-LEVEL I83;
DEF I-HIDROS-FILTER I84;
DEF I-HIDROS-PRESSURE I85;
; Entradas Equilibrador-Gap-Crash
DEF I-BALANCE-AUT-MAN I86; Balance-Marposs
DEF I-BALANCE-WHEEL-OK I87; Balance System
;DEF I-BALANCE_INCYCLE I87; Marposs
DEF I-BALANCE-ALARM I88; Balance-Marposs
DEF I-BALANCE-RPM-OK I89; Balance-Marposs
DEF I-BALANCE-IN-TOL I90; Balance-Marposs
DEF I-BALANCE-BURN-A I91; Balance
DEF I-BALANCE-COMM-CRITICA I91; Marposs CAMBIO I96
DEF I-BALANCE-CRASH-A I92; Balance-Marposs
DEF I-BALANCE-GAP-A I93; Balance-Marposs
DEF I-BALANCE-ALARM-CRASH-GAP I94; Marposs
DEF I-BALANCE-MAX-VIBR I95; Balance-Marposs-Con el E82 meter 24 v.
; Entradas Medidor
DEF I-MEDIDOR-C1 I80; Marposs
DEF I-MEDIDOR-C2 I81; Marposs
DEF I-MEDIDOR-ALARM I82; Marposs
DEF I-MEDIDOR-AUTO I83; Marposs
DEF I-MEDIDOR-ADELANTE I84; Marposs
DEF I-MEDIDOR-ATRAS I85; Marposs
;
; Entradas de volante portatil
DEF I-JOG+ I96; CAMBIO
DEF I-RAPID I97; CAMBIO
DEF I-JOG- I98; CAMBIO
DEF I-BIT0 I99; CAMBIO
DEF I-BIT1 I100; CAMBIO
DEF I-BIT2 I101; CAMBIO
DEF I-ENABL1 I102; CAMBIO
DEF I-ENABL2 I102; CAMBIO
DEF I-X1 I103; CAMBIO
DEF I-X10 I104; CAMBIO
; Entradas plato magnetico
DEF I-CHUCK-POT-1 I80;
DEF I-CHUCK-POT-2 I81;
DEF I-CHUCK-POT-3 I82;
DEF I-CHUCK-POT-4 I83;
DEF I-CHUCK-POT-5 I84;
DEF I-CHUCK-POT-6 I85;
DEF I-CHUCK-POT-7 I86;
; Entradas enfriadora de URMO
DEF I-FRIGO-OK I80; CAMBIO I2
; Entradas muela de refrentar abatible mismas que el diamantador
DEF I-ABATIBLE-BACK I66
DEF I-ABATIBLE-FORW I67
; Diamantador de moleta con variador
DEF I-MOLETA-OK I81
DEF I-MOLETA-ON I82
;
; Entradas contrapunto
DEF I-PEDAL-CONTRAPTO I82
;
; Sujeciَn de husillo
;
DEF I-DET1-SUJ-IZDA I80
DEF I-DET2-SUJ-IZDA I81
DEF I-DETDOWN-SUJ-IZDA I82
DEF I-DET1-SUJ-DCHA I83
DEF I-DET2-SUJ-DCHA I84
DEF I-DETDOWN-SUJ-DCHA I85
;
;------------------------- PLC OUTPUTS ---8+24-----------------------------------
DEF O-EMERGEN O1;
DEF O-POSAX-FORW O2;
; Balance System
DEF O-CYCLE-SEL-0 O3; Balance System
DEF O-CYCLE-SEL-1 O4; Balance System
DEF O-BALANCE-NEUTRAL O6; Balance System
; Marposs
DEF O-BALANCE-AUTO O3; Marposs.
DEF O-RESET-ALARM O4; Marposs
DEF O-BALANCE-ENABLE O6; Marposs
;Balance System and Marposs
DEF O-BALANCE-REQUEST O5;
DEF O-GAP-ENABLE O7; GAP ENABLE-RESTAURAR LIMITES
DEF O-CRASH-ENABLE O8; CRASH ENABLE-RESTAURAR ALARMAS
;
DEF O-START-WHEEL O33;
DEF O-START-IWHEEL O34;
DEF O-RESET-DRIVES O35;
DEF O-HYDRAULIC O36;
DEF O-POWER-BYPASS O37;
DEF O-DELTA-STAR O38;
DEF O-COOLANT O39;
DEF O-DRESSER-BACK O40;
DEF O-OPEN-PROTECTION O41; Protecciones automaticas y normales
DEF O-UNBLOCK-A-AXIS O42; CAMBIO O52;
DEF O-EV-LUBRICATION O43; Si no lleva central hidraulica es la bomba
DEF O-CLOSE-PROTECTION O44; Protecciones automaticas
DEF O-COOL-INT O45; CAMBIO O51;
DEF O-DRESSER-FORW O46; CAMBIO O48
DEF O-OPEN-CHUCK O47;
DEF O-CLOSE-CHUCK O48;
DEF O-COOL-FACE O49;
DEF O-COOL-EXT O50;
; Transvase
DEF O-TRANSVASE O51; Transvase
; Muela Hidrostatica
DEF O-HIDROSTATIC O52;
; Divisor Aisiakin
DEF O-PUMP-BLOCK-AISIAKIN O53; Aisiakin
; Baliza
DEF O-GREEN-LIGHT O54;
DEF O-YELLOW-LIGHT O55;
DEF O-RED-LIGHT O56;
; Medidor
DEF O-MEDIDOR-AUTO O51; CAMBIO O42
DEF O-MEDIDOR-REQUEST O52; CAMBIO O46
DEF O-MEDIDOR-CONTROL-POINT O53; CAMBIO O48
DEF O-MEDIDOR-AVANZA O54; CAMBIO O45
DEF O-MEDIDOR-BIT-0 O55; CAMBIO O43
DEF O-MEDIDOR-BIT-1 O56; CAMBIO O44
;----------Muela de Refrentar abatible
DEF O-ABATIBLE-FORW O46;
DEF O-ABATIBLE-BACK O40;
DEF O-ABATIBLE-ENGANCHE O42;
;
; Diamantador de moleta con variador
DEF O-MOLETA-ON O56
;
; Contrapunto
DEF O-CONTRAPTO O51
;
; Sujeciَn de husillo
;
DEF O-SUJ-IZDA O51
DEF O-SUJ-DCHA O52
;------------------------- KEYBOARD INPUTS --------------------------------------
;DEF K-ENTER B4R560;
;DEF K-WIN201 B22R560;
;DEF K-TABLE B31R560;
;DEF K-COOLANT B5R561;
;DEF K-DRESSING B6R561;
;DEF K-VAIVEN B7R561;
;DEF K-RESET B12R561;
;DEF K-LUBRI B13R561;
;DEF K-MAGNET-REDUCE B14R561;
;DEF K-BYPASS B15R561;
;DEF K-WHEEL-STOP B26R561;
;DEF K-IWHEEL-STOP B27R561;
;DEF K-WHEEL-START B28R561;
;DEF K-IWHEEL-START B29R561;
;DEF K-POWER B30R561;
;DEF K-HANDWHEEL B31R561;
;DEF K-SPEED-UP B0R562;
;DEF K-DEMAGNETIZATION B1R562;
;DEF K-SPEED-DOWN B2R562;
;DEF K-MAGNETIZATION B3R562;
;DEF K-CONDITIONAL B4R562;
;DEF K-PROTEC B5R562;
;DEF K-SPINDLE-SLOW B6R562; ?????
;DEF K-AXIS-A+ B8R562;
;DEF K-AXIS-X+ B9R562;
;DEF K-VAIVEN-Z+ B10R562; ?????
;DEF K-AXIS-Z- B11R562;
;DEF K-AXIS-Z+ B13R562;
;DEF K-VAIVEN-Z- B14R562; ?????
;DEF K-AXIS-X- B15R562;
;DEF K-SPINDLE-RIGHT B17R562;
;DEF K-SPINDLE-STOP B19R562;
;DEF K-AXIS-A- B20R562;
;DEF K-SPINDLE-LEFT B22R562;
;DEF K-STOP B23R562;
;
;
;------------------------- LED OUTPUTS --------------------------------
;
;DEF L-EXTWHEEL TCLED1
;DEF L-POWER TCLED2
;DEF L-INTWHEEL TCLED3
;DEF L-HNDWH TCLED4
;DEF L-STOP TCLED6
;DEF L-PROTEC TCLED8
;DEF L-VAIVEN TCLED9
;DEF L-LIMIT TCLED10
;DEF L-MAGNET TCLED12
;DEF L-COOLANT TCLED13
;DEF L-LUBRI TCLED14
;
;------------------------- SUBROUTINE DEFINITION----------------
;DEF L-MDECOD L1
;DEF L-INIT L2
;DEF L-EMERGEN L3
;DEF L-LUBRI L4
;DEF L-COOLING L5
;DEF L-AXIS-X L6
;DEF L-AXIS-Z L7
;DEF L-SPINDLE L8
;DEF L-AXIS-A L9
;DEF L-VAIVEN L10
;
;DEF L-PLATO L11
;DEF L-PLATOMAG L61
;
;DEF L-EXTWHEEL L12
;OPCION VARIADOR L62
;
;DEF L-INTWHEEL L13
;OPCION VARIADOR L63
;
;DEF L-DRESSER L14
;OPCION BRAZO L64
;DEF L-GAPCRASH L15
;DEF L-HYDRA L16
;DEF L-AXIAL L17
;DEF L-PROTEC L18
;DEF L-BALANCE L19
;DEF L-CONE L20
;DEF L-HANDWHEEL1 L21
;DEF L-HANDWHEEL2 L71
;DEF L-WHEELPROT L22
;DEF L-BALIZA L23
;DEF L-AXIS-C L24
;DEF L-MEDIDOR L25
;DEF L-HODROSTATIC L26
;DEF L-MOLETA L27
;DEF L-CONTRAPTO L28
;DEF L-COOLER L29
;DEF L-MODES L30
;DEF L-SCREEN L31
;DEF L-CENTRAL L32
;DEF L-MSG L33
;
;------------------------------MARKS AND REGISTERS----------------------------
;
;INIT MODULE
;
DEF M-WHEELVAR B1R213 ;VARIADOR DE VELOCIDAD EXT
DEF M-CHUCK-DETECTOR B3R211 ;DETECTOR DE PLATO
DEF M-FIRST-CYCLE M100 ;FIRST CYCLE
;
;EMERGENCY MODULE
DEF R-DRIVES-FAULT R15
;DEF R-EMER-AUX1 R16
DEF R-EMER-TIME R17
DEF R-PROTECTIONS-FAULT R18
DEF R-VARS-FAULT R19
DEF M-DRIVES-OK M150
DEF M-POW-OK M151
DEF M-POW-LOOP-OK M152
DEF M-POW-F0 M153
DEF M-DRVS-VARS-OK M154
DEF M-EMER-RETRACTING M155
DEF M-EMER-RETIRADA M156
DEF M-EMER-TERMICOS-OK M157
DEF M-VARS-OK M158
DEF M-EMER-PROBECRASH M159
DEF M-EMER-PRBST M160
DEF M-EMER-SECU-PROBE M161
DEF M-SUB-RUNNING M162 ;MARCA USADA EN SUBRUTINAS
;
;LUBRICATION MODULE
DEF R-LUB-DISTX R20
DEF R-LUB-DISTZ R21
DEF R-LUB-DISTB R22
DEF R-LUB-DISTZB R23
DEF R-LUB-GFUNCTION R24
DEF R-LUB-PRES R25
DEF M-EV-LUBRICATION M200
DEF M-LUBREQ M201
DEF M-LUB-PRES-CLAMPED M202
DEF M-LUB-PRES-ERROR M203
DEF M-LUB-CONFIR-PRES M204
DEF M-LUB-NO-LEVEL M205
;
;COOLING MODULE
DEF R-COOL-WHEEL R26 ;MARCA USADA EN SUBRUTINAS
DEF R-TRANSVASE R27
DEF M-COOL-ON M250
DEF M-COOL-ON-EXT M251
DEF M-COOL-ON-INT M252
DEF M-COOL-ON-FACE M253
DEF M-COOL-NO-M M254
;
;X AXIS MODULE
DEF R-XAXIS-PLANE R30
DEF R-P1196 R31
DEF R-PLCOFVISUX R32
;
;
;Z AXIS MODULE
DEF R-XZAXIS-FAST R35
DEF R-PLCOFVISUZ R36
DEF R-AUX R37
;
;SPINDLE MODULE
DEF R-SP-SETP R40
DEF R-MAX-SETP R41
DEF R-STEP-SETP R42
DEF R-SPINDLE-10 R43
DEF M-NMIN M400
DEF M-M19 M401
DEF M-M3 M402
DEF M-TURN-RQST M403
DEF M-SPINDLE-10-PERCENT M404
DEF M-SPINDLE-10-DOWN M405
DEF M-SPINDLE-INVERT M406
;
;A-AXIS MODULE
DEF C-LIMIT-A- -311000 ;LIMITE NEGATIVO DEL DIVISOR
DEF C-LIMIT-A+ 25051000 ;LIMITE POSITIVO DEL DIVISOR
DEF R-POSA R45
DEF M-M31 M450
DEF M-A-MOVING M451
DEF M-UNBLOCK-A-AXIS M452
DEF M-A-IN-EXTERNAL M453
DEF M-A-IN-INTERNAL M454
DEF M-A-IN-FACE M455
;
;VAIVEN MODULE
;DEF P-VAIVEN-TEMP GUP2050 ;PARAMETER USED UN CYCLES
DEF R-VAIVEN-TEMP R50
DEF M-VAIVEN M500
DEF M-VAIVEN-LIMIT+ M501
DEF M-VAIVEN-LIMIT- M502
;DEF M-VAIVEN-AUX1 M503
;DEF M-VAIVEN-AUX2 M504
DEF M-VAIVEN-STOP-WR M505 ;MARK USED IN CNC CYCLES
DEF M-VAIVEN-STOP-RD M506 ;MARK USED IN CNC CYCLES
DEF M-VAIVEN-STOP-PLC M507
;
;MAGNETIC CHUCK
;
DEF R-CHUCK-STATE R55
DEF M-CHUCK-MAGN-CYCLE M552
DEF M-CHUCK-DEMAGN-CYCLE M553
DEF M-CHUCK-SAFE-CONDITIONS M554
DEF M-CHUCK-STEP-TIME B0R55
DEF M-CHUCK-STEP-1 B1R55 ;OFF STATE
DEF M-CHUCK-STEP-2 B2R55 ;CLOSE STATE
DEF M-CHUCK-STEP-3 B3R55 ;OPEN STATE
DEF M-CHUCK-STEP-4 B4R55
DEF M-CHUCK-STEP-5 B5R55
DEF M-CHUCK-STEP-6 B6R55
DEF M-CHUCK-STEP-7 B7R55
;
;
;EXTERNAL WHEEL MODULE
DEF R-WHEEL-SETPOINT R60 ;REGISTER USED IN CNC CYCLES
DEF R-WHEEL-SETPOINT2 R61 ;REGISTER USED IN CNC CYCLES
DEF M-WHEEL-IN-MANUAL M602
DEF M-WHEEL-IN-AUTO M603
DEF M-WHEEL-TURNING M604
DEF M-WHEEL-RPM-OK M605
DEF M-WHEEL-STOPPED M606
;DEF M-WHEEL-AUX1 M607
DEF M-WHEEL-MSG1 M608 ;MARK USED IN CNC CYCLES
DEF M-WHEEL-MSG2 M609 ;MARK USED IN CNC CYCLES
DEF M-WHEEL-MSG3 M610 ;MARK USED IN CNC CYCLES
DEF M-WHEEL-MSG4 M611 ;MARK USED IN CNC CYCLES
DEF M-WHEEL-TURNING-5S M612
DEF M-WHEEL-ACCELERATION M613
;
;INTERNAL WHEEL MODULE
;DEF P-INTWHEEL-VELO GUP2065 ;PARAMETER USED UN CYCLES
;DEF P-INTWHEEL-DENO GUP2066 ;PARAMETER USED UN CYCLES
;DEF P-INTWHEEL-NUME GUP2067 ;PARAMETER USED UN CYCLES
;DEF R-INTWHEEL-AUX1 R65
;DEF R-INTWHEEL-AUX2 R66
;DEF R-INTWHEEL-AUX3 R67
DEF R-INTWHEEL-VISU R68 ;REGISTER USED UN CYCLES
DEF R-INTWHEEL-SETPOINT R69
;DEF R-INTWHEEL-AUX4 R71
DEF M-INTWHEEL-IN-MANUAL M650
DEF M-INTWHEEL-IN-AUTO M651
DEF M-INTWHEEL-TURNING M652
DEF M-INTWHEEL-RPM-OK M653
DEF M-INTWHEEL-STOPPED M654
;DEF M-INTWHEEL-AUX1 M655
DEF M-INTWHEEL-ACCELERATION M656
DEF M-INTWHEEL-TURNING-5S M657
DEF M-INTWHEEL-KEYPRESSED M658
;DEF M-INTWHEEL-AUX1 M663
;
;DRESSER MODULE
DEF R-DRESS-MODE R70 ;REGISTER USED IN CNC CYCLES
;DEF R-INTWHEEL-AUX4 R71 ;REGISTER USED IN PREVIOUS MODULE
DEF R-DRESS-REQUEST R72 ;REGISTER USED IN CNC CYCLES
DEF R-DRESS-AUX1 R73
DEF M-DRESS-DRESSING M700 ;MARK USED IN CNC CYCLES
DEF M-DRESS-FORW M701 ;MARK USED IN CNC CYCLES
DEF M-DRESS-BACK M702
DEF M-DRESS-CONDITIONS M703
DEF M-DRESS-MOVING M704
DEF M-DRESS-FAULT M705
DEF M-DRESS-REQUEST M706 ;MARK USED IN CYCLES
DEF M-DRESS-IN-BACK M707 ;MARK USED IN CYCLES
DEF M-DRESS-IN-FORW M708 ;MARK USED IN CYCLES
DEF M-DRESS-INSTALLED M709 ;MARK USED IN CYCLES
;
;GAP-CRASH MODULE
DEF M-CRASH-SITUATION M751
DEF M-GAP-START-CYCLE M752
DEF M-CRASH-MESSAGE M753
DEF M-BALANCE-PRG1 M754
DEF M-BALANCE-PRG2 M755
DEF M-BALANCE-RESTORE-LIMITS M756
DEF M-CRASH-ALLOWED M757
DEF M-BALANCE-AUX1 M758
DEF M-CRASH-ENABLED M759
DEF M-CRASH-WHEELS-STOPPED M760
;
;HYDRAULIC MODULE
;
;
;AXIAL-POSITIONER MODULE
DEF R-POSAX-USED-IN-CYCLES R85 ;REGISTER USED IN CNC CYCLES
DEF M-POSAX-FORW M850
DEF M-POSAX-ACTIVE M851
DEF M-POSAX-ERROR M852
DEF M-POSAX-POSITIONING M853
DEF M-POSAX-AUX1 M854
;
;PROTECTION MODULE
;
DEF M-PROT-OFF M900
DEF M-PROT-LOCKED M901
DEF M-PROT-OPEN M902
DEF M-PROT-SEMI M903
;
DEF M-PROT-POS-REACHED M919
DEF M-PROT-REDUCE-FEED M920
DEF M-PROT-KEY M921
DEF M-PROT-KEY-LONG M922
;DEF M-PROT-AUX-OPEN M923
;DEF M-PROT-AUX1 M924
;
;BALANCE MODULE
DEF M-BALANCE-DISABLED M953
DEF M-BALANCE-REQUEST M954
DEF M-BALANCE-RPM-ERROR M955
DEF M-BALANCE-ALARM M956
DEF M-BALANCE-REQUEST-AUTO M957 ;PARA EL E82
DEF M-BALANCE-REQUEST-MAN M958 ;PARA EL E82
;
;PLCOFFSET MODULE
;DEF R-CONE-AUX1 R100
;DEF R-CONE-AUX2 R101
;DEF R-CONE-AUX3 R102
;DEF R-CONE-AUX4 R103
;DEF R-CONE-AUX5 R104
;DEF R-CONE-AUX6 R105
;DEF R-CONE-AUX7 R106
DEF R-CONE-OFFSETVAL R107
DEF R-CONE-VAL1 R108 ;REGISTER USED IN CNC CYCLES
DEF R-CONE-VAL2 R109 ;REGISTER USED IN CNC CYCLES
DEF M-CONE-COMPENSATION-ACTIVE M1000 ;MARK USED IN CNC CYCLES
DEF M-CONE-CANCELLATION M1001
DEF M-CONE-CANCELLATE M1002
;DEF M-CONE-AUX1 M1003
;
; HANDWHEEL MODULE
;
DEF R-HAND-AXIS R110
DEF R-HAND-AUX1 R111
;DEF R-HAND-AUX2 R112
;DEF R-HAND-AUX3 R113
;DEF R-HAND-AUX4 R114
;DEF R-HAND-AUX5 R115
;DEF R-HAND-AUX6 R116
;DEF R-HAND-AUX7 R117
;DEF R-HAND-AUX8 R118
;DEF R-HAND-AUX9 R119
;DEF R-HAND-AUX10 R120
DEF M-HAND-ACTIVE M1100
DEF M-HAND-PLCOFFSET M1101
DEF M-HAND-X- M1102
DEF M-HAND-X+ M1103
DEF M-HAND-Z- M1104
DEF M-HAND-Z+ M1105
DEF M-HAND-A- M1106
DEF M-HAND-A+ M1107
DEF M-HAND-RAPID M1108
DEF M-HAND-FX1 M1109
DEF M-HAND-FX10 M1110
DEF M-HAND-FX100 M1111
DEF M-HAND-ADI-X1 M1112
DEF M-HAND-ADI-X10 M1113
DEF M-HAND-ELI-OFF M1114
DEF M-HAND-INTER M1115
DEF M-HAND-PLCOFF-COUNTING M1116
DEF M-HAND-HBEON M1117
DEF M-HAND-AUX1 M1118
DEF M-HAND-AUX2 M1119
DEF M-HAND-AUX3 M1120
DEF M-HAND-XSEL M1121
DEF M-HAND-ZSEL M1122
DEF M-HAND-ASEL M1123
DEF M-HAND-ENABLE M1124
DEF M-HAND-X1 M1125
DEF M-HAND-X10 M1126
DEF M-HAND-X100 M1127
DEF M-HAND-INC-SELECTED M1128
DEF M-HAND-HDWON M1129
DEF M-HAND-JOGON M1130
DEF M-HAND-CONTINUO M1131
;
; PROTECCION DE MUELA
DEF M-WHEEL-WAS-OPENED M1150 ;MARK USED IN CNC CYCLES
DEF M-BALANCE-NEUTRAL-RQ M1151
DEF M-WHEEL-OPEN M1152
;
;C AXIS
;
DEF R-CAXIS-SERCOSREG R125
DEF R-CAXIS-TABLA R126
DEF R-CAXIS-PLANO R127
;DEF R-CAXIS-AUX1 R128
;DEF R-CAXIS-AUX2 R129
;DEF R-CAXIS-AUX3 R124
;DEF R-CAXIS-AUX4 R123
DEF M-CAXIS-REQUEST M1250
DEF M-CAXIS-TABLE-CHANGED M1251
DEF M-CAXIS-CHANGE-TAB-REQ M1252
DEF M-CAXIS-END M1253
;
;MEDIDOR
;
DEF M-MEDIDOR-OUT M1300
DEF M-MEDIDOR-FAULT M1301
DEF M-MEDIDOR-NOAUTO M1302
DEF M-MEDIDOR-MOVING M1303
DEF M-MEDIDOR-AUX1 M1304
DEF M-MEDIDOR-REQ M1304
;
;HIDROSTATICO MODULE
;
;
; MOLETA CON VARIADOR
DEF R-MOLETA-SETPOINT R140 ;REGISTER USED IN CYCLES
DEF R-MOLETA-AUX1 R141
DEF M-MOLETA-INSTALLED M1400
;
;CONTRAPUNTO
;
DEF M-CTRPTO-SAFE-CONDITION M1450
DEF M-OPEN-AUT-CTRPTO M1451
DEF M-OPEN-MAN-CTRPTO M1452
DEF M-OPEN-CONTRAPTO M1453
;
;
;MODE MODULE
;DEF R-OPE R160
;DEF R-SWITCH R161
;DEF R-HOURS R162
;DEF R-HOURLIM R163
DEF M-PRGRUN M1600
DEF M-MODE-CONDITIONAL M1601
DEF M-MODE-UNPROTECTED M1602
DEF M-REFERENCED M1603
DEF M-VALOR-REAL M1604 ;REGISTER USED IN CYCLES
DEF M-ORDAINDU M1605
;
;SCREENS MODULE
;DEF R-PAN R170
;DEF R-DAT R171
;DEF R-SCREEN-AUX1 R172
;DEF R-CHISPEO R173
;
;CENTRAL MODULE
;DEF R-SPINDLE-STOP R180
;DEF R-FEEDHOLD R181
;DEF R-READIN-DISABLE R182
;DEF R-CYC-START-DIS R183
;DEF R-CYC-STOP R184
;DEF R-AUXEND-DISABLE R185
;DEF R-WHEEL-DISABLE R186
;DEF R-INTWHEEL-DISABLE R187
DEF M-WHEEL-STOP-CONDITIONS M1800
DEF M-INTWHEEL-STOP-CONDITIONS M1801
DEF M-SPINDLE-STOP-CONDITIONS M1802
;
;MSG MODULE
;
DEF R-MSG1-32 R190
DEF R-MSG32-64 R191
DEF R-MSG64-96 R192
;DEF R-MSG-AUX1 R193
;DEF R-MSG-AUX2 R194
;DEF R-MSG-AUX3 R195
;DEF R-MSG-AUX4 R196
;DEF R-MSG-AUX5 R197
;DEF R-MSG-AUX6 R198
;DEF R-MSG-AUX7 R199
;DEF R-MSG-AUX8 R200
;DEF R-MSG-AUX9 R201
;DEF M-MSG-AUX M1900
;
;
;GENERAL MARKS
DEF R-AXIS R210 ;options for axis
; b0=x, b1=z, b2=cab, b3=a, b4=c
DEF R-CHUCK R211 ;options for chuck
; b0=neumatic, b1=hydraulic, b2=magnetic, b3=detector, b6=contrapunto hid.
DEF R-HAND R212 ;options for hadwheel
; b0=manual, b1=portable
DEF R-WHEEL R213 ;options for wheel. Usado en ciclo 9000.
; b0=ext without var, b1=ext with var, b2=int without var, b3= int without var,
; b4=wheel protections, b5=face wheel, b6=grupo hidrostatico, b7:ext with fagor drive
DEF R-BALANCE R214 ;options for balance,gap,crash
; b0= balance, b1=gap ext, b2=crash ext, b3=gap int, b4=crash int,b5=gap face,
; b6=crash face, b7:balance system(0)/marposs(1)
DEF R-DEVICES R215 ;options of other devices.
; b0=pneumatic axial, b1=hydraulic dresser arm; b2:normal protec, b3:automatic protec,
; b4:baliza; b5:Enfriadora; b6:Divisor Aisiakin; b7:Engrase Intza
DEF R-OPTIONS R216
; b0=cone compensation; b1:seguridad sonda; b2: termicos prioridad 2; b3: Refrig. con transvase; b4: seguridad divisor
DEF R-MOREOPT R217
; b0=abatible interior; b1: abatible refentar; b2: parada intermedia puerta; b3:Apave; b4=inprocess measurer;
;
DEF R-FASTIN R230 ; REGISTER FOR FAST INPUT SELECTION
DEF R-LUBX R231 ; LEE CADA CUANTO DE DIST X HAY QUE ENGRASAR
DEF R-LUBZ R232 ; IDEM PARA Z
DEF R-CABINTER R233 ; CAB. PORTAPIEZAS EN INTERMITENTE
DEF R-FILTER R234 ; FILTRO PARA NO REBASAR PLC OFFSET
DEF R-ZERO R235 ; ZERO REGISTER
DEF R-OVERRIDE R236 ; VALOR DEL OVERRIDE DEL CANAL
DEF R-MINAUXEND R237 ; PARAMETER MINAUXEND
DEF M-TEMP M2000
DEF M-TIMER1 M2010 ; 200 MSEC
DEF M-TIMER2 M2011
DEF M-CUSTOM-MODE M5512 ; MARCA DE SISTEMA PARA INDICAR CONVERSACIONAL
;
;
;Ms'PROGRAMA CNC
;=================================
;
;M3 - ARRANQUE CABEZAL PORTAPIEZA
;M5 - PARADA CABEZAL
;M7 - REFRIGERANTE DE INTERIORES
;M8 - REFRIGERANTE DE EXTERIORES
;M9 - PARADA REFRIGERANTE
;M10 - ADELANTAR DRESSER
;M11 - ATRASAR DRESSER
;M12 - MARCHA MUELA INTERIORES
;M13 - PARO MUELA INTERIORES
;M14 - ARRANQUE MUELA
;M16 - PARO MUELA
;M17 - MARCHA DIAMANTADOR MOLETA
;M18 - PARADA DIAMANTADOR MOLETA
;M26 - ACTIVAR GRUPO HIDROSTATICO
;M27 -
;M28 - BAJAR ABATIBLE
;M29 - SUBIR ABATIBLE
;M31 - Eje-A vivo
;M32 - Eje-A muerto
;M35 - Activa variacion rpm cabezal
;M36 - Desactiva variacion rpm cabezal
;M37 - Activa inversion de giro cabezal
;M38 - Anula inversion de giro de cabezal
;M5O - EJECUTAR VAIVEN
;M51 - PARADA VAIVEN
;M55 - ABRIR CONTRAPUNTO
;M56 - CERRAR CONTRAPUNTO
;M72 -
;M73 -
;M75 - EQUILIBRAR MUELA SI ESTA DESEQUILIBRADA
;M76 - START CICLE GAP
;M77 - STOP CICLE GAP
;M78 - HABILITAR CRASH
;M79 - DESHABILITAR CRASH
;M80 - ACTIVAR SEGURIDAD SONDA
;M81 - ANULAR SEGURIDAD SONDA
;M84 - INHIBIR PLCOF
;M85 - RESET M84
;M90 - SALIDA POS. AXIAL
;M91 - RETIRADA POS. AXIAL
;M92 - ACTIVAR POS. AXIAL
;M93 - DESACTIVAR POS. AXIAL
;M94 - ANULAR EQUILIBRADOR
;M95 - ANULAR M94
;M98 - CERRAR MICRO SEGURIDAD (QUITAR TENSION A BOBINA)
;M99 - ABRIR MICRO DE SEGURIDAD
;
; PROGRAMA PLC
;==============
;-------------
;INITIAL CYCLE
;-------------
;
CY1
REA
()=CAL L2
END
;
;---------------
;CICLO PERIDODICO
;---------------
PE 10
REA
(B1R214 ;gap ext
OR B2R214 ;crash ext
OR B3R214 ;gap int
OR B4R214 ;crash int
OR B5R214 ;gap refren
OR B6R214) ;crash refren
AND NOT B7R214 ;no marposs
= CAL L15
;
(B1R214 ;gap ext
OR B2R214 ;crash ext
OR B3R214 ;gap int
OR B4R214 ;crash int
OR B5R214 ;gap refren
OR B6R214) ;crash refren
AND B7R214 ;marposs
= CAL L65
END
;---------------
;MAIN SCAN CYCLE
;---------------
PRG
REA
 
M

mickbzh

Compagnon
Il vous manque une très grosse partie du programme PLC.
Il faudrait voir avec le fabriquant de la machine si il ne peut pas vous fournir une sauvegarde.
 
M

MOHAMED LAMINE ASSASLA

Nouveau
Merci ; pour l'info mais je n'arrive pas a le contacter .
 
Pour répondre, connectez ou inscrivez vous.
Haut