vidéos d'apprentissage sur You Tube

  • Auteur de la discussion nola
  • Date de début
N

nola

Nouveau
Bonjour à tous!

J'ai fait une recherche rapide sur tout le site pour savoir s'il était mentionné "TUBALCAIN"...
Rien vu de tout cela...
Pour moi qui suis un petit amateur, c'est une mine d'information et de trucs excellents...
Au passage : des trucs que nos "anciens" maîtrisaient, car on leur avait transmis...
mais nos anciens sont partis... on a perdu un sacré savoir!!! :mad:
Ok, c'est en anglais - mais c'est super bien expliqué!!!
et souvent, il suffit de bien suivre le fil de la vidéo...

Un exemple avec le centrage en 4 mors :

ou une autre avec l'alignement de la contre poupée :

Une mine d'or : recherchez "machine shop tips" sur You Tube, vous allez tomber sur ses vidéos, et c'est mieux expliqué qu'à l'école :-D
(ou bien on retient mieux avec l'age??? :oops: )

bons copeaux à tous!!

Nola
 
D

DUDU77

Ouvrier
Bonjour a tous et merci pour les liens ,sympas ces petits films!
cordialement dudu.
 
B

brise-copeaux

Compagnon
Bonjour

C'est bien la première fois que je vois le touchau de comparateur au dos sur la deuxième vidéo........en plus c'est pas tout jeune!!!.

Merci a Nola.

@ +
 
A

alnicyma

Ouvrier
Merci superbe vidéo pour moi qui re-débute je vais visionner tout ça. :tumbsupe:
 
N

nola

Nouveau
Bonsoir à tous,

Dans la série Machine Tips de Tubalcain, j'ai commencé un index en français, qui pourra aider ceux pour qui l'anglais est un peu dur.

Ces vidéos reprennent les bases, mais il y a toujours quelque chose à glaner (surtout pour les amateurs comme moi...).

Je vous indiquerai aussi les trucs qu'il utilise et qui sont "sioux" :-D
ça, c'est pour les plus pressés d'entre nous. :lol:

Au passage, les boiseux américains utilisent souvent des outils homemade - euh, je veux dire de fabrication maison, et on les retrouve aussi dans leurs catalogues d'outillage.

Je pense qu'ils le font aussi pour l'usinage des métaux.
Et sur ce point ils ont une véritable culture du partage, comme on la retrouve sur ce forum :wink:

Soyez un peu patients, il y a 29 vidéos, je les visionne pour mieux les détailler dans l'index...

Bonne séance de "méca-ciné"

@ bientôt,
Nola
 
A

alnicyma

Ouvrier
nola a dit:
Bonsoir à tous,

Dans la série Machine Tips de Tubalcain, j'ai commencé un index en français, qui pourra aider ceux pour qui l'anglais est un peu dur.

Ces vidéos reprennent les bases, mais il y a toujours quelque chose à glaner (surtout pour les amateurs comme moi...).

Je vous indiquerai aussi les trucs qu'il utilise et qui sont "sioux" :-D
ça, c'est pour les plus pressés d'entre nous. :lol:

Au passage, les boiseux américains utilisent souvent des outils homemade - euh, je veux dire de fabrication maison, et on les retrouve aussi dans leurs catalogues d'outillage.

Je pense qu'ils le font aussi pour l'usinage des métaux.
Et sur ce point ils ont une véritable culture du partage, comme on la retrouve sur ce forum :wink:

Soyez un peu patients, il y a 29 vidéos, je les visionne pour mieux les détailler dans l'index...

Bonne séance de "méca-ciné"

@ bientôt,
Nola

Super j'attend ça avec :chupachupz:
 
J

Jebri

Ouvrier
Merci d'avance nola pour cette initiative.
Des séances de vidéo en perspective.
Cordialement.
Jebri.
 
N

nola

Nouveau
Bonsoir à tous!

J'ai 49 vidéos d'enregistrées sur le pc...
J'en ai fait déjà 13, patience... :)
Les intitulés machine shops sont plus particulièrement destinés à ceux qui ne connaissent pas les machines ou certaines techniques.
Mr Pete prend son temps pour expliquer les choses en détail...
Mais avec une certaine pratique des machines d'atelier, on y trouve des trucs sympa... et on zappe ce que l'on connait... (hou, c'est pas bien de ne pas écouter en classe! :prayer:)

Bonne soirée et merci pour les encouragements :wink:

Bons copeaux,

Nola
 
N

nola

Nouveau
Tips Machine Shop Indies of video Tubalcain

Hello everyone!

Here's video index Briefly Describing Their happy ...
Many beginners think I will find an interest in small thesis presentations, ALTHOUGH They Are in English

There are nice --other videos, it's a goal start :)

To join the video, copy it and paste the title into the search engine of YouTube (no need if I have not screwed up ...)

Remember que la Measures are American and need to be adapté to the metric system ...


Note: In Some videos Was the plastic machined so que la video Does not drag on ...

Always adapted the tool and cutting requirements to the materials used ...

MACHINE SHOP TIPS # 1 Taps Tubalcain
[MEDIA = youtube] q7UvwyLSdsM [/ MEDIA]
Presentation of taps and Their use in general

MACHINE SHOP TIPS # 2 Taps Tubalcain
http://www.youtube.com/watch?v=KILXWdcS
How to tap in the steel, aluminum, what use tap (basics)

MACHINE SHOP # 3 TIPS Taps Tubalcain
http://www.youtube.com/watch?v=JTEra2RO
Tapping blind holes in drill press (hand taps), turn on (hand and taps Machine taps)
to see - interesting small assemblies: a spring device caught in the chuck That Ensures pressure on the tap and the guide.
A sliding chuck for taps guided by a tree caught in the chuck side against doll

MACHINE SHOP TIPS # 4 Dies Threading Tubalcain
[MEDIA = youtube] E68dYHzYuBQ [/ MEDIA]
presentation of races

MACHINE SHOP TIPS # 5 Tubalcain Threading Dies
[MEDIA = youtube] zGczZ7qcCLQ [/ MEDIA]
Using different channels (except tubes chains)

MACHINE SHOP TIPS # 6 Tubalcain Threading Dies
http://www.youtube.com/watch?v=bZv_5H-x
Using chains on metal lathe, hand and motor

See: guided sliding door industry by a tree caught in the sheath against the doll

MACHINE SHOP TIPS # 7 Cutting Pipe Threads Tubalcain
http://www.youtube.com/watch?v=wRqLKNXl
Using tubes Sectors (tapered threads)

MACHINE SHOP TIPS # 8 Types of Threads part A Tubalcain
http://www.youtube.com/watch?v=UcPa0JoM
The different threads, in general.

MACHINE SHOP TIPS # 9 Types of Threads B share Tubalcain
[MEDIA = youtube] hrxIaiTm1HU [/ MEDIA]
The ABCs of UNF threads, UNC, Whitworth, metric ...

MACHINE SHOP TIPS # 10 Identifying Bolt Threads Tubalcain
http://www.youtube.com/watch?v=R4vRwdd0 ... re = related
How to Identify a thread we screw - thread gauge of use

MACHINE SHOP TIPS # 11 Drilling Crossholes Tubalcain
http://www.youtube.com/watch?v=cBYQmaeI ... re = related
How to spot and drill a hole diameter ...
jig with drilling / milling machine gun

MACHINE SHOP TIPS # 12 Thread Repair (male) Tubalcain
[MEDIA = youtube] 8ZP9m1z7o9k [/ MEDIA]
How to Restore the threads (screws) damaged
Using the third item, Net File, tool to restore the threads

MACHINE SHOP TIPS # 13 BRIDGEPORT MILL Parts (A) Tubalcain
http://www.youtube.com/watch?v=YbpESuNQ ... re = related
Introducing the Bridgeport milling machine
Identification of the individual components of the Machine

MACHINE SHOP TIPS # 14 BRIDGEPORT MILL Parts (B) Tubalcain
http://www.youtube.com/watch?v=7oB7B_eJ ... re = related
Introducing the Bridgeport milling - continued

http://www.machinerypartsdepot.com dirty and repair pécialisée website in this marque.Des EXPLODED VIEWS are available in the section:
"" "" "Parts for Bridgeport"
(Eg http://www.machinerypartsdepot.com/site ... age / 549847 )

MACHINE SHOP TIPS # 15 Bridgeport Mill tramming Tubalcain
http://www.youtube.com/watch?v=qGdptphP ... re = related
Setting the squareness of the head with a malicious tool: a pin for square

MACHINE SHOP TIPS # 16 Clausing Lathe LH threading Tubalcain
http://www.youtube.com/watch?v=FRa5An0i ... re = related
Execution of a left-hand thread with Clausing Lathe
One thing I like is the little checklist before starting. The pros do it instinctively, fans purpose May be surprised at first ...

Break a room or getting hurt are well worth a little caution ...
Note the small magnet stuck on the end Useful thread gauge with steel ...

MACHINE SHOP TIPS # 17 Threading to Shoulder Tubalcain
http://www.youtube.com/watch?v=w2eWqeyO ... re = related
Thread, tool assembly upside in the tool turret, spindle rotating in reverse too, using the indicator thread.
The goal: do not approach the tool to the jaws taken During short jaw, shoulder or ...
Warning for owners towers with screw chuck ...

MACHINE SHOP TIPS # 18 Musing on Lathe Threading Tubalcain
http://www.youtube.com/watch?v=1IqN0sHu ... re = related
Reflections on the implementation of threads: why prefer an oblique penetration When executing a thread.
(Orientation of the tool carriage 29 ° INSTEAD of 30 °, 60 ° for thread (metric UNC or UNF)
Thread length: not reserve for Particular jobs
How back into the not so Moved to the tool (false manipulation ')

MACHINE SHOP TIPS # 19 Sine Bar Tubalcain part 1
http://www.youtube.com/watch?v=ojjdRRXj ... re = related
The "sine bar" or how to resolve a labor at a specific angle
more info at: http://www.wisc-online.com/ , search "sine bar"
eg http://www.wisc-online.com/Objects/View ... ID = MSR2202
Nice little animation ...

MACHINE SHOP TIPS # 20 Sine Bar Tubalcain part 2
http://www.youtube.com/watch?v=RMmSsQj6 ... re = related
Barre sinus
Path to trusquin on marble, at a Given Angle
Orientation of the tool carriage
Tuning milling from one room to a Given Angle
Precise orientation of the head of a milling machine

MACHINE SHOP TIPS # 21 Micrometers Part 1 Tubalcain
http://www.youtube.com/watch?v=5Eyk5KmJ ... re = related
Présentattion micrometers and how prndre care of 'em and adjust with the tools provided by the manufacturer

MACHINE SHOP TIPS # 22 Micrometer Quiz Part 2 Tubalcain
http://www.youtube.com/watch?v=gKwzwdEd ... re = related
how to read a micrometer? ok it's in English and Measures by inches and fractions of inches, it is well intended Explained - a little quiz at the end - funny and informative!

MACHINE SHOP TIPS # 23 on the Internal Threading Lathe Tubalcain
Interior thread, oblique penetration (orientation of carriage tool 29 ° INSTEAD of 30 °, 60 ° metric thread for UNC or UNF)

MACHINE SHOP TIPS # 24 Acme Threading Part 1 Tubalcain
http://www.youtube.com/watch?v=olC9xyHh ... re = related
Trapezoidal thread - its characteristics (ACME thread)
how to prepare tool
WARNING: ONCE AGAIN, WE ARE THE US, AND ANGLE BETWEEN THE SIDES ARE THE THREAD 29 ° 30 ° NOT LIKE ON A THREAD METRIC TRAPEZOIDALE

MACHINE SHOP TIPS # 25 Acme Threading Part 2 Tubalcain
http://www.youtube.com/watch?v=dhec5osx ... re = related
adjustment of the tool on the turn, trapezoidal thread of execution

MACHINE SHOP TIPS # 26 Transferring Holes Part 1 Tubalcain
http://www.youtube.com/watch?v=vMHM1Ku7 ... re = related
Refer to Technical SPECIFICALLY holes (housing rehabilitation, various adaptations ...)
use of transfer needles

MACHINE SHOP TIPS # 27 Transferring Holes Part 2 Tubalcain
http://www.youtube.com/watch?v=u7kkvWYI ... re = related
realization of transfers
Accurately transfer using screw to locate the threaded holes were lid eg

MACHINE SHOP TIPS # 28 Hardinge Dividing Head Part 1 Tubalcain
http://www.youtube.com/watch?v=pIg8InzU ... re = related
presentation and setting a universal divider (tray with holes)
Calculating the division of Sectors and setting the alidade

MACHINE SHOP TIPS # 29 Hardinge Dividing Head Part 2 Tubalcain
http://www.youtube.com/watch?v=MXV7eV_W ... re = related
performance milling (divison by 6) and pre-drilling a circular room recevoir 5 Equally spaced holes

Good video and if you're interested, order English bothers That you, I will try to spin you a little shot of hand ...

Good chips to all!

Nola: Wink:
 
Dernière édition par un modérateur:

Sujets similaires

2
Réponses
27
Affichages
909
jean-jacques
J
T
Réponses
28
Affichages
2 913
Tristan l'apprenti
T
B
Réponses
37
Affichages
2 997
Squal112
Squal112
N
Réponses
78
Affichages
9 409
nipil
N
yvon29
Réponses
152
Affichages
61 692
Mimifor
M
Haut