P
PUSSY
Lexique
Bonjour,
En parcourant le forum et en suivant les liens donnés pour un cyclone
(http://www.instructables.com/id/Dust-Sn ... to-Switch/),
je suis "tombé" sur ce dispositif :
Le détail de l'interrupteur à lames souples :
Voici la liste des composants donnée par l'auteur :
< Reed Switch - just one of a bunch I had laying round. It is about 1" in length, glass body, the coil goes tightly round this.
D1 - rectifying diode
D2 - rectifying diode
TR1 - a small step down transformer (to 6V) - time to use one of those 'wall warts' you have been saving.
C2 - 6.3V 4700uF
(but just use what you have in your scraps box)
C4 - 6.3V 4700uF
C5 - 6.3V 4700uF
DC Relay - 6V DC relay, a smallish low current thing is what you want.
Contactor - Heavy duty contactor, I found this on a thrown out saw - these are useful for NVR applications.
R2 - 8.2KOhm resistor, important for protecting the reed switch.
C3 - a 0.22uF 275V AC capacitor
R1 - 330 Ohm resistor
B2 - a suitably beefy bridge rectifier >
1) Que pensez-vous de ce système ?
2) Quelle est la valeur du condensateur C1 ?
Merci de vos réponses (éclairées),
cordialement,
PUSSY
En parcourant le forum et en suivant les liens donnés pour un cyclone
(http://www.instructables.com/id/Dust-Sn ... to-Switch/),
je suis "tombé" sur ce dispositif :
Le détail de l'interrupteur à lames souples :
Voici la liste des composants donnée par l'auteur :
< Reed Switch - just one of a bunch I had laying round. It is about 1" in length, glass body, the coil goes tightly round this.
D1 - rectifying diode
D2 - rectifying diode
TR1 - a small step down transformer (to 6V) - time to use one of those 'wall warts' you have been saving.
C2 - 6.3V 4700uF
(but just use what you have in your scraps box)
C4 - 6.3V 4700uF
C5 - 6.3V 4700uF
DC Relay - 6V DC relay, a smallish low current thing is what you want.
Contactor - Heavy duty contactor, I found this on a thrown out saw - these are useful for NVR applications.
R2 - 8.2KOhm resistor, important for protecting the reed switch.
C3 - a 0.22uF 275V AC capacitor
R1 - 330 Ohm resistor
B2 - a suitably beefy bridge rectifier >
1) Que pensez-vous de ce système ?
2) Quelle est la valeur du condensateur C1 ?
Merci de vos réponses (éclairées),
cordialement,
PUSSY